-
Products
- Vehicle Repair Compounds
-
Petrokem B-Cut Super
Petrokem B-Cut Super
FINE abrasive cream DEVELOPED to polish surfaces to a fine, smooth, gloss finish
Petrokem B-Cut Super
Petrokem B-Cut Super is a fine water based compound specially designed to cut and polish auto finishes, clear coats and old painted surfaces to a high gloss polished surface. The product can be used to remove stubborn dirt, diesel fuel film, sanding scratches or other scratch marks from the surface. B-Cut Super is specially used on discolored painted surfaces to cut and polish the micro surface of the paint film to obtain the original color with a smooth glossy finish. The product is recommended to be used with an electric or air driven polisher coupled with a foam or wool buffing pad.
-
Shake well before use
- Apply sufficient compound to work a 60 cm x 60 cm area.
- Place the foam/wool pad over the compound and spread before starting the machine. (Machine speed: 1500-2500 rpm). If the pad is new or dry, spread some compound on the pad first to ‘wet’ the pad.
- Buff using light pressure.
- Reduce the pressure as the compound begins to dry up.
- Wipe the surface and check whether the deep scratches have been removed. Re-apply if necessary.
- Apply Petrokem B-Cut Plus or B-Cut ZeroC for a complete scratch free finish. (Select appropriate product(s) depending on the level of finish required.)
- Clean adjacent panel surfaces with a clean polishing wipe. Un-painted plastic surfaces should be cleaned immediately before moving to the next panel.
- To further improve the gloss level of the surface, apply Petrokem C-Wax over the polished surface to obtain a perfect water repellent, waxed finish.
-
