-
Products
- Vehicle Repair Compounds
-
Petrokem A-Cut Plus
Petrokem A-Cut Plus
Petrokem A Cut Plus is an advanced compound made from superior-grade engineered abrasives, designed to quickly and efficiently remove P1500 sanding marks.
Petrokem A-Cut Plus
Petrokem A-Cut Plus is a water based cutting compound specially designed for the vehicle re-finishing and detailing industry. The product can be used to remove scratches (incurred due to the usage of sand paper P1500) completely. The resultant surface is a gloss finish that can be enhanced by using Petrokem A-Cut or Petrokem B-Cut Super. The gloss level can be further improved by using B-Cut Plus or B-Cut ZeroC. The product is recommended to be used with an electric or air driven polisher coupled with a foam or wool buffing pad.
-
Shake well before use
- Apply sufficient compound to work a 60 cm x 60 cm area.
- Place the foam/wool pad over the compound and spread before starting the machine. (Machine speed: 1500-2500 rpm). If the pad is new or dry, spread some compound on the pad first to ‘wet’ the pad.
- Buff using light to medium pressure.
- Reduce the pressure as the compound begins to dry up.
- Wipe the surface and check whether the deep scratches have been removed. Re-apply if necessary.
- Apply Petrokem B-Cut Super, B-Cut Plus or B-Cut ZeroC for a complete scratch free finish. (Select appropriate product(s) depending on the level of finish required.)
- Clean adjacent panel surfaces with a clean polishing wipe. Un-painted plastic surfaces should be cleaned immediately before moving to the next panel.
- To further improve the gloss level of the surface, apply Petrokem C-Wax over the polished surface to obtain a perfect water repellent, waxed finish.
-
