Petrokem MPG Primer

Petrokem MPG Primer is a two component, high quality isocyanate free primer for metal, hard plastic and glass surfaces.

Petrokem MPG Primer

Petrokem MPG Primer is a two component, high quality isocyanate free primer for metal, hard plastic and glass surfaces. The product can also be used for refinishing of vehicles. Recommended to use over glass, hard plastics and metal surfaces (steel, aluminium, zinc, copper etc.) as a high adhesion anticorrosive protective primer. The product can also be used as a high quality protective primer for wood, Fibreglass, concrete, cement or over most other similar surfaces. Petrokem MPG Primer is resistant to salty sea spray and therefore recommended to use in coastal areas. The product should be applied immediately after the cleaning process of the surface. The product can be over coated with Petrokem Marine Paint, Petrokem C-Guard, 3Dot® 2K Auto Filler, Petrokem Carpach® Metal Filler or 3Dot® Polyester Putty Fine.

  • Mix thoroughly equal volumes of Petrokem MPG Primer base and activator. Five minutes of thorough mixing is recommended. Use the mixture within 1-1.5 hours.
  • Apply the mixture to the surface by using a suitable spray equipment (at 40-60psi) or brush/roller. The primer should be applied to the bare metal for anticorrosive protection and for best results.
  • Allow the primer to dry at least for 60 minutes. Then apply Petrokem Marine Paint, C-Guard, 3Dot® 2K Auto Filler, Petrokem Carpach Metal Filler or 3 Dot Polyester Putty Fine over the Petrokem MPG Primer.
  • For other structural metal or steel work – Apply one or two coats of Petrokem MPG Primer and a high quality protective to coat such as Petrokem 3Dot® 2K Acrylic paint for colour/weather/corrosion protection.

  • Approximately 100 – 120 SQFT per 1 litre of mixed primer

Product
Product

PR.Red