Petrokem Epoxy Iron Oxide Primer

Petrokem Epoxy Iron Oxide Primer is a two component, high quality anticorrosive primer developed to meet the increasing demand for high quality anticorrosive primer.

Petrokem Epoxy Iron Oxide Primer

Petrokem Epoxy Iron Oxide Primer is a two component, high quality anticorrosive primer developed to meet the increasing demand for high quality anticorrosive primer. The product is a combination of high quality epoxy resin and polyamide hardener. It is recommended for the protection and maintenance of all metal structures in civil engineering applications, storage tanks, ship hulls, metal pipe lines, bridges, off shore structures, radial gates, chemical plants, oil installations etc. The product should be applied immediately after the cleaning process of the metal. The product acts as a high quality anticorrosive primer for all metals such as steel, aluminum, zinc, copper, etc. The product will protect the surface against highly corrosive elements such as chemical fumes, acid fumes etc. Petrokem epoxy iron oxide primer is also resistant to salty sea spray and therefore recommended for coastal areas. Overcoat the surface with Petrokem Epoxy Marine Paint, Petrokem Epoxy Gloss Paint or Petrokem Coal Tar Epoxy Paint for best results.

  • Mix thoroughly equal volumes of Petrokem Epoxy Iron Oxide Primer resin and hardener. Five minutes of thorough mixing is recommended. Use the mixture within 3 hours.
  • Apply the mixture to the surface by using a suitable spray equipment (at 40-60psi) or brush/roller. The primer should be applied to the bare metal for anticorrosive protection and for best results.

  • Approximately 9 – 11 m² per 1 litre pack

Product
Product

PR. Red