Petrokem C-Guard 353 WB

Petrokem C-Guard 353 WB is a single component water-base anti-corrosive top coat based on acrylic polymer technology developed to be applied over epoxy paints to withstand UV radiation (sunlight) in exposed environments.

Petrokem C-Guard 353 WB

Petrokem C-Guard 353 WB is a single component water-base anti-corrosive top coat based on acrylic polymer technology developed to be applied over epoxy paints to withstand UV radiation (sunlight) in exposed environments. The product is highly recommended to be used over epoxy painted metal structures in ships, metal pipelines, bridges, off shore structures, radial gates, chemical plants, beverage factories, oil installations, storage tanks & house hold applications etc. The product once fully dried is resistant to salty sea spray and other highly corrosive elements. The product will protect and decorate all metal surfaces when applied over epoxy painted systems.

  • The product can be used direct from the container however if too thick for the application, use up to 15% of water to thin the product.
  • Apply to the surface by using a suitable spray equipment (at 40-60psi) or brush /roller. The product should be applied over epoxy painted systems when UV resistance is the prime requirement. Allow the paint to dry for at least 90 mins prior to use. An additional coat can be applied after 90 mins if required.

Approximately 9 – 11 m² per 1 litre

Product
Product