Petrokem C-Guard®

high build two pack epoxy system for highly corrosive environments

Petrokem C-Guard®

Petrokem C-Guard® Marine Paint is a high quality two component non-toxic epoxy paint developed to meet the increasing demand for high quality anticorrosive painting systems and is specially designed for highly corrosive industrial and coastal environments.

  • Mix thoroughly equal volumes of Petrokem C-Guard® marine paint resin and hardener. Five minutes of thorough mixing is recommended. If too thick for the application use Petrokem Epoxy Thinner 221 to thin the product. Use the mixture within 1-3 hours.
  • Apply the mixture to the surface by using a suitable spray equipment (at 40-60psi) or brush /roller. The paint could be applied to the bare metal or use Petrokem epoxy iron oxide primer or 3Dot® 2K Auto Primer as the prime coat and then apply Petrokem C-Guard® as the second coat for best protection against corrosion. Allow the paint to dry at least for 24 hrs before using the surface. Another coat could be applied after 8 hrs if required. The coating will gain its full toughness in 72 hrs.

  • Approximately 7 – 9 m² per 1 litre pack

Product
Product